What Guidance Identifies Federal Information Security Controls?

A plain guide to the NIST publications that identify federal information security controls, and how your contract decides which one applies.

By the Total 360 Security team6 min read
Printed contract pages with colored tabs and a highlighter on a desk, for a guide to federal information security controls

NIST Special Publication 800-53 identifies federal information security and privacy controls. FISMA is the law requiring federal agencies to protect their systems; it does not list the controls. For a contractor, the contract determines which publication applies. Confirm that requirement before choosing a baseline or drafting a Technology Control Plan.

A control catalog describes what must be addressed, but someone still has to own each control, put it into operation and keep the evidence that it runs. That gap is where we work: we run the program, and the document is only part of it. For a Texas contractor, the work starts with the contract clause, not a downloaded template.

What a Technology Control Plan Is, and Who Defines Its Contents

For an agency contract, a Technology Control Plan should describe how you protect the information involved in that work. It identifies the systems handling the data, who has access and which providers host or process it.

The name alone does not establish a federal standard or required format. Get the agency’s template and deadline from the contracting officer. Confirm what the agency means by the term before writing the plan.

Which Publication Does Each Clause Name?

First, Ask the Contracting Officer Which Publication Each Clause Names, Total 360 Security

Get the applicable publication in writing before anyone drafts a control document. A contract summary is not a substitute for the actual clauses and incorporated attachments.

  1. Pull every clause that touches information security. Read the requirements for handling data and documenting controls. Record each named publication and revision.
  2. Send written questions to the contracting officer. Ask which publication each clause points to. Request the template and the submission deadline.
  3. Keep the answers in the contract file. Store them where the people drafting and maintaining the plan can retrieve them, not in one person’s inbox.
  4. Confirm the deadline and format. Use the request that is current, and do not assume the last agency’s submission rules apply.
  5. If instructions conflict, get one answer in writing. When an answer does not match the clause, ask for clarification before drafting against it.

Which Federal Baseline Fits Which Kind of Contract

Use the contract situation to identify what needs confirmation. Requirements for a federal agency system differ from requirements for controlled unclassified information, or CUI, held on your own systems.

Contract situationApplicable guidance to confirmWhat to check
Federal prime or subcontract involving CUI on nonfederal systemsNIST SP 800-171The publication and revision required by the contract
Federal contract involving systems operated for the agencyNIST SP 800-53, with impact categorization under FIPS 199 and baselines in SP 800-53BThe agency’s assigned impact level and required baseline
State agency contract naming a federal standardThe named publicationThe required revision and any agency-specific requirements
Cloud service sold to a Texas state agencyTX-RAMP under Texas Government Code 2063.408, plus contract requirementsThe certification requirements applicable to the service
Contractor staff working inside a Texas state agency systemCertified cybersecurity training each contract term under Texas Government Code 2063.104Who must complete training and where completion records are kept
Texas municipal or county contract naming no standardRequest clarification. Texas Business and Commerce Code 521.052 requires reasonable procedures to protect sensitive personal informationThe agency’s documentation requirements and whether you hold covered information
Hosted or third-party environmentThe contract’s baseline, applied to each componentWhich party operates each control and supplies its evidence

For work involving criminal justice information, consult the separate CJIS Security Policy guide. Do not assume the table above captures that contract’s obligations.

Where the Controls Are Catalogued and Which Version to Cite

NIST’s SP 800-53 Revision 5, released December 10, 2020, organizes controls into 20 families. Their two-letter identifiers include AC for Access Control and IR for Incident Response. Revision 5 added two families: PT (PII Processing and Transparency) and SR (Supply Chain Risk Management).

The surrounding publications serve different purposes. FIPS 199 categorizes system impact as low, moderate or high. Each security objective is rated on its own, and the highest rating sets the overall category. FIPS 200 sets minimum security requirements. SP 800-53B supplies control baselines for each impact level.

SP 800-53A covers assessment methods. SP 800-37 describes the Risk Management Framework used to select and tailor controls, implement them, assess their effectiveness, authorize the system and monitor it. OMB Circular A-130 establishes federal policy for managing information resources.

Check the current release and patch updates before building your control set. If the contract names an older revision, get written direction rather than silently substituting a newer one. A current catalog still does not prove that your controls operate.

What the First Draft of a Technology Control Plan Should Contain

Use the agency’s required format. Within it, make the scope and operating responsibilities explicit. Start with the systems that actually handle contract data, not every system your company owns.

  1. Start with the systems that handle contract data. Identify them and their boundaries, because expanding the scope without a contractual reason adds maintenance work.
  2. State where the data is stored, including any provider-hosted locations.
  3. Explain who can access the data, who approves that access, and how it is removed once it is no longer needed.
  4. Name each provider that hosts or processes the data, separate its responsibilities from yours, and request its evidence in writing.
  5. Name the required publication and revision, and record the impact categorization where the contract requires it.
  6. Assign an owner to each control and identify the record that shows it operates.
  7. Name who maintains the plan and the date it must next be reviewed.

A control with no owner and no evidence is a sentence in a document, not a working control. For example, an access-removal procedure needs someone responsible for execution and records showing that access was removed.

How to Keep the Plan Current After You Submit It

Set update triggers before submission. A new hosting provider, a replacement system or a changed contract clause can alter the plan’s scope and responsibilities. Assign someone to evaluate those changes rather than waiting for the next submission deadline.

At each review, compare the document with the operating environment. Check provider evidence and the cited publication’s release status. If the contract still requires an older revision, record that requirement and seek clarification about any transition.

This article is general information, not legal advice. Get qualified legal review when obligations are unclear or a clause could create liability. A technical team should not interpret those commitments alone.

Once the publication and scope are settled, someone must run the controls. Based in Fort Worth, we operate security programs across all 13 risk domains. Our virtual CISO services cover framework selection, incident response planning and compliance program ownership. We are Texas DPS-licensed and CPP, CISSP, CISM credentialed.

Bring the relevant clauses and the agency’s request to a 30-minute risk discussion to discuss the program ownership your contract requires.

Frequently asked questions

What guidance identifies federal information security controls for a contractor?

NIST SP 800-53 identifies federal information security and privacy controls. Your contract determines which publication applies to your work. For CUI on nonfederal systems, NIST SP 800-171 is usually the relevant publication; confirm the requirement against the contract.

Does Texas law require a Technology Control Plan?

The requirements cited here do not establish a general Texas obligation to produce a document by that name. Texas Business and Commerce Code 521.052 requires reasonable procedures to protect sensitive personal information without naming a framework. An agency contract can impose separate documentation requirements, so confirm its terms with counsel.

Does following NIST SP 800-53 make a company compliant?

Selecting controls from SP 800-53 does not establish compliance. You must implement the applicable requirements and maintain evidence that the controls operate; the contract or governing authority determines what must be demonstrated.

Which NIST revision should a control plan cite?

Cite the revision required by the contract and check its applicable release and patch updates. If the contract names an older revision, request written clarification before changing it. NIST SP 800-53 Revision 5 was released December 10, 2020.

Do I need a lawyer to review the contract before writing the plan?

Get qualified legal review if the obligations are unclear or a clause could create liability. Resolve those questions before committing in writing. Your technical team can then document controls against the confirmed requirements.

Total 360 Security provides virtual Chief Security Officer, vCISO, and Enterprise Security Risk Management programs for mid-market organizations. They design, run, and report security programs covering all 13 risk domains rather than just offering advisory decks or point solutions. The firm is Texas DPS-licensed with CPP, CISSP, and CISM credentials.

Serving Texas, California, Nevada, New Mexico.