SB 553 Workplace Violence Plans: What California Employers Need

SB 553 requires California employers to run a written workplace violence prevention plan, train staff and keep a violent incident log. This guide covers what the plan must include, who is exempt and which records to keep.

By the Total 360 Security team7 min read
California industrial staff entrance with a cork notice board and badge reader beside a steel door, for SB 553 workplace viol

California’s SB 553 requires covered employers to write and run a Workplace Violence Prevention Plan and keep a violent incident log. Effective July 1, 2024, it is enforced by Cal/OSHA under Labor Code section 6401.9. A completed template is a starting point, not an operating program.

For a multi-site employer, start with accountability. Each location needs someone who receives threat reports, plus a backup. Above them, assign one executive owner with authority to correct problems across the sites.

What must a workplace violence prevention plan include under California rules?

The plan must be effective at all times in all work areas. Cal/OSHA’s optional Model Workplace Violence Prevention Plan provides a starting point. Replace its placeholders with your site hazards and responsible people. Check the full statutory requirements before sign-off; this checklist is not a substitute for them.

  1. Name the responsible people. Identify who maintains the plan and who acts at each site. Give employees a person to contact, not just a department name.
  2. Set up a threat-reporting route. Explain how employees report a concern without retaliation and what happens after a report arrives.
  3. Assess the hazards at each site. Look at actual exposures, such as an open reception desk or employees working alone after closing.
  4. Train employees on the risks of their jobs. Cover the plan and the risks associated with each employee’s job.
  5. Keep a violent incident log. Record incidents using the statutory fields, without identifying individuals.
  6. Document hazard checks and corrections. Record what was inspected and how each hazard was addressed.
  7. Investigate every incident. Examine what happened and identify corrective action.
  8. Review the plan on a schedule. Assign review dates and define events that trigger an earlier review.

Who does SB 553 cover, and who does it leave out?

Confirm coverage before excluding a location or employee. Headcount alone does not settle the question. Public access and the conditions of remote work also matter.

The four kinds of violence the plan must address

SB 553 names four sources of violence: strangers with criminal intent, clients, coworkers and supervisors, and people with a personal relationship to an employee. Assess which exposures your sites face.

A customer threatening a receptionist presents a different problem from an employee’s former partner arriving at the workplace. Your reporting and response procedures need to account for that difference.

Who falls outside the rule

The small-workplace exemption applies where fewer than 10 employees work at one time and the workplace is not open to the public. Healthcare facilities follow separate workplace violence requirements. Separate rules also apply to law enforcement and correctional facilities.

Employees working remotely from a location they choose, outside the employer’s control, are generally exempt. Employees assigned by the employer to work from home belong in the plan and training. Confirm your staffing arrangements against the statute with counsel before relying on an exemption.

What training is required, and how often must it happen?

What training is required, and how often must it happen?, Total 360 Security

Train employees when the plan is introduced, at least annually afterward, and when new risks are identified. Record the triggers so a changed exposure prompts training rather than waiting for next year’s session.

  1. Train when the plan is introduced. Explain your plan, including how employees report threats safely.
  2. Train at least once a year. Set a recurring date and retain the training record.
  3. Train again when new risks appear. Address newly identified risks, such as a change in public access or lone-working arrangements.
  4. Make the training interactive. Give employees an opportunity to ask questions. Reading slides aloud is not a substitute for interaction.
  5. Tailor the content to each job. Explain the employee’s workplace risks and how to prevent or respond to violence.

Ask employees to explain their reporting route in their own words. If they cannot identify whom to tell, revisit that part of the training.

Who takes a threat report at 2 a.m., and how is the reporter protected?

Name a primary recipient and a backup for every shift you operate. An unmonitored shared inbox is not an after-hours reporting route. Specify who checks the channel and who acts when a report arrives.

The plan must protect employees from retaliation for reporting threats. Explain that protection in language a supervisor can repeat. Employees also need to know what happens after they report, including how the concern reaches someone authorized to respond.

What goes in the violent incident log, and who completes it?

What goes in the violent incident log, and who completes it?, Total 360 Security

Labor Code section 6401.9(d) sets out the violent incident log fields. They include incident details without identifying individuals. Use the statutory fields rather than reducing the log to a free-text description.

Design the form so a site manager can complete it within the same shift. Record the event, where and when it happened, and the response. Keep names and other identifying details out of the log.

Which records must you keep, and for how long?

Set retention by record type. Training records have a shorter minimum retention period than incident logs, so a single deletion rule for the whole program creates an avoidable compliance risk.

Record type Minimum retention What it documents
Hazard-check and hazard-fix records Five years Hazards assessed and corrections made
Violent incident log Five years Incident details and responses
Investigation records Five years Findings from incident investigations
Training records One year Employee training

Before deleting records, check the current statute and any other preservation obligations with counsel. A minimum retention period is not an instruction to destroy a file.

Who owns the plan across several California sites?

Local responsibility does not replace organization-wide ownership. Each site manager can maintain a plan while no one checks whether reports reach leadership or overdue corrections get funded.

One owner above the sites

Assign an executive owner with authority across locations. That person approves the program, tracks unresolved hazards and reports its status to leadership. HR can support the work, but correcting physical security exposures also requires operational authority.

We operate virtual Chief Security Officer programs for mid-market organizations, and our service areas include California. Our programs cover all 13 Enterprise Security Risk Management domains and report directly to the board. We are Texas DPS-licensed and CPP, CISSP, CISM credentialed.

Site annexes under one signature

A master plan with site annexes is one practical structure, not a prescribed legal format. Each annex should identify the location’s hazards and reporting route, with responsible people and backups. The executive owner approves the set and checks that each annex reflects current operations.

Our virtual CSO program page explains the executive security role behind this work.

How does the plan sit beside your existing IIPP?

The Workplace Violence Prevention Plan can sit within your Injury and Illness Prevention Program, or IIPP. Decide where the records and responsibilities belong before maintaining two overlapping documents.

If the plans remain separate, check their shared procedures for contradictions. A supervisor should not find different reporting instructions depending on which document they open. A hazard correction also needs one accountable owner, even when both programs reference it.

When should the plan be reviewed, and what must be checked before year-end?

Set an annual review date and document each review. Also review the plan after incidents and operational changes that expose gaps. Opening a new public-facing location requires more than copying the previous site’s annex.

  1. Schedule the annual review. Assign an owner and a due date.
  2. Hold a review after every incident. Examine whether reporting and response procedures worked, then address the failures.
  3. Reassess after site changes. Revisit hazards whenever a location or working arrangement changes.
  4. Follow the new general-industry standard. The California Department of Industrial Relations states that the Occupational Safety and Health Standards Board must adopt a general-industry workplace violence standard by December 31, 2026. Check its current status and any additional requirements before finalizing your year-end plan.
  5. Record each review. Record each review with its date and reviewer, and note any change made, including a decision that none was needed.

If responsibility across your California sites is unresolved, book a 30-minute risk discussion to discuss executive ownership of the program.

Frequently asked questions

What is SB 553 in California?

SB 553 requires covered California employers to operate a written Workplace Violence Prevention Plan, provide employee training and maintain required records. It took effect July 1, 2024, and sits in Labor Code section 6401.9, which Cal/OSHA enforces.

Who is not covered under SB 553?

The small-workplace exemption applies where fewer than 10 employees work at one time and the workplace is not open to the public. Separate workplace violence rules apply to healthcare facilities and certain law enforcement and correctional facilities. Remote employees who choose their work location outside employer control are generally exempt; employer-assigned home workers belong in the plan and training. Confirm the applicable exemption with counsel.

How often must California employers train employees on workplace violence prevention?

Covered employees need training when the plan is introduced, at least annually afterward, and when new risks are identified. Training must be interactive and address the employer’s plan, safe reporting and risks associated with the employee’s job.

What records must employers keep under SB 553, and for how long?

Keep hazard-assessment and correction records, violent incident logs and investigation records for at least five years. Keep training records for at least one year. Check the current statute and other preservation obligations before deleting records.

What is a violent incident log and what goes in it?

A violent incident log records workplace violence incidents using the fields required by Labor Code section 6401.9(d). It includes what happened, where and when it occurred, and the response, without identifying individuals. Assign someone at each site to complete it promptly using a form based on the statutory requirements.

Total 360 Security provides virtual Chief Security Officer, vCISO, and Enterprise Security Risk Management programs for mid-market organizations. They design, run, and report security programs covering all 13 risk domains rather than just offering advisory decks or point solutions. The firm is Texas DPS-licensed with CPP, CISSP, and CISM credentials.

Serving Texas, California, Nevada, New Mexico.